|
Detail Description:
|
Firestone Single-Ply LVOC Primer is a solvent based primer designed to clean and prime RubberGard™ EPDM membranes to receive seam and cover tapes. Single-Ply LVOC Primer VOC content does not exceed 250 grams per liter, and can be used in air quality management districts with VOC limits of 250 grams per liter.
Coverage is approximately 25-50 linear feet when using with 3" or 6" wide tapes 32oz (Quart size) Can
Method of Application
1. Mix thoroughly before and during use. Product will appear uniform after mixing.
2. Surfaces to receive Single-Ply LVOC Primer must be clean, dry and free of foreign materials and excess dusting agent. Clean with broom or rags to remove contaminates.
3. Apply Single-Ply LVOC Primer at the coverage specified to the splicing surfaces using the QuickScrubber™ or QuickScrubber Plus pad and handle. Use back and forth strokes (four minimum) with heavy pressure along the length of the splicing area, until membrane surfaces become uniform in color, with no streaks or puddles. Additional scrubbing is required where the substrate is contaminated.
4. Bear down on the QuickScrubber Plus pad and handle system during application so the pad holder flattens to allow the total surface of the pad to contact with the substrate to receive Single-Ply QuickPrime Primer.
5. Allow the surfaces to dry completely before applying QuickSeam products. Use touch-push test to determine readiness. Dry time will vary due to ambient conditions. Complete seaming procedures per Firestone's current specifications and details.
|